Geometry Selection of the Power Coupling Loop for H-type Cavities
https://doi.org/10.56304/S2079562922050104
Abstract
This paper considers H-type cavity power coupling loop design issues and provides the results of the modeling. The dependence of the coupling coefficient on the loop geometry is established.
About the Authors
M. M. Bulgacheva
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
Moscow, 115409
M. A. Gusarova
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
Moscow, 115409
M. V. Lalayan
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
Moscow, 115409
Ya. V. Shashkov
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
Moscow, 115409
References
1. Polozov S.M. et al. // Proc. Russian Particle Conf. (RuPAC'21). 2021. P. 51.
2. Dôme G. // Proc. CERN Accelerator School: RF Engineering for Particle Accelerators. CERN 92-03. 1991. Vol. 1. P. 1.
3. Padamsee H., Knobloch J., Hays T. RF Superconductivity for Accelerators. 1998. New York: Wiley.
4. Bulgacheva M.M., Gusarova M.A. // Phys. At. Nucl. 2021. V. 84 (12). P. 1973.
Review
For citations:
Bulgacheva M.M., Gusarova M.A., Lalayan M.V., Shashkov Ya.V. Geometry Selection of the Power Coupling Loop for H-type Cavities. Nuclear Physics and Engineering. 2023;14(6):593-597. (In Russ.) https://doi.org/10.56304/S2079562922050104
Views:
25
Email this article 