MANUFACTURING MICROWAVE ELEMENTS FOR A TWO-SECTION 8-MEV APPLIED-PURPOSES LINEAR ELECTRON ACCELERATOR
https://doi.org/10.56304/S2079562926010525
EDN: CXYYMW
Abstract
The work describes the activities carried out in the process of manufacturing a two-section accelerating structure for the project of an applied-purposes linear accelerator of electrons. The theoretical dependences of the electrodynamic characteristics on the geometric parameters of the microwave elements are obtained. The values of these characteristics for the manufactured structure are measured.
About the Authors
R. A. Zbruev
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
A. A. Batov
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
S. M. Polozov
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
M. V. Lalayan
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
M. V. Vladimirov
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
T. V. Bondarenko
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Russian Federation
Russian Federation
References
1. Chernyaev A.P., Varzar S.M. // Phys. At. Nucl. 2014. V. 77. P. 1203–1215.
2. Batov A.A. et al. // Phys. Part. Nucl. Lett. 2023. V. 20 (4). P. 699–703.
3. Samarokov N.Y. et al. // Phys. Part. Nucl. Lett. 2024. V. 21 (3). P. 337–340.
4. Polozov S.M., Rashchikov V.I., Demsky M.I. // Proc. RuPAC’2016 Conf. St. Petersburg, Russia. 2016. P. 493–495.
5. Basyl D.S. et al. // Proc. RuPAC’2016 Conf. St. Petersburg, Russia. 2016. P. 173–175.
6. Збруев Р.А., Батов А.А., Бондаренко Т.В., Полозов С.М., Лалаян М.В. // Ядерн. физ. инжинир. 2025. Т. 16 (5). С. 668−673 [Zbruev R.A., Batov A.A., Bondarenko T.V., Polozov S.M., Lalayan M.V. // Phys. At. Nucl. 2024. V. 87 (11). P. 1676–1681].
7. Батов А.А., Збруев Р.А., Лалаян М.В., Полозов С.М. // Ядерн. физ. инжинир. 2024. Т. 15 (5). С. 473–477 [Batov A.A., Zbruev R.А., Lalayan М.V., Polozov S.М. // Phys. At. Nucl. 2023. V. 86 (11). P. 2411–2415].
8. Ashanin I.A. et al. // Radiophys. Quantum Electron. 2023. V. 66 (7). P. 504–512.
9. Ashanin I.A. et al. // Phys. Part. Nucl. Lett. 2024. V. 21 (3). P. 322–327.
10. Ashanin I.A. et al. // Nucl. Instrum. Methods Phys. Res., Sec. A. 2025. V. 1075. P. 170393.
Review
For citations:
Zbruev R.A., Batov A.A., Polozov S.M., Lalayan M.V., Vladimirov M.V., Bondarenko T.V. MANUFACTURING MICROWAVE ELEMENTS FOR A TWO-SECTION 8-MEV APPLIED-PURPOSES LINEAR ELECTRON ACCELERATOR. Nuclear Physics and Engineering. 2026;17(3):484-487. (In Russ.) https://doi.org/10.56304/S2079562926010525. EDN: CXYYMW
Views:
60
JATS XML
Email this article 