Verification of the 3D CAD-Model of T-15MD Tokamak
https://doi.org/10.56304/S2079562923030314
Abstract
To design the complex of diagnostics and technical systems of the T-15MD tokamak, a three-dimensional CAD-model is used, which includes all structural elements of the tokamak and surrounding heating and diagnostic systems, technical systems such as vacuum pumping and data acquisition systems, etc. Using of the CAD-model allows to take into account relative location of adjacent systems and the tokamak geometry and integrate newly designed systems. This approach is applied to the design of ITER and used for the first time for Russian tokamaks. In order to provide the most comprehensive matching of the CAD-model to the real T-15MD it is necessary to perform verification of the CAD model. This paper presents a method of the verification of the CAD-model of T-15MD tokamak complex based on the data of the laser geodesic scanning and the results of assessing the accuracy of the performed work.
About the Authors
I. A. Shelegeda
National Research Centre "Kurchatov Institute", Moscow, 123182 Russia
Bauman Moscow State Technical University, Moscow, 105005 Russia
Russian Federation
Russian Federation
M. A. Drabinskiy
National Research Centre "Kurchatov Institute", Moscow, 123182 Russia
Russian Federation
Russian Federation
M. V. Talalay
National Research Centre "Kurchatov Institute", Moscow, 123182 Russia
Bauman Moscow State Technical University, Moscow, 105005 Russia
Russian Federation
Russian Federation
I. A. Nazarov
JSC "GSPI", Moscow, 115088 Russia
Russian Federation
Russian Federation
References
1. <em>Хвостенко и др.</em> // ВАНТ. Сер.: Термоядерный синтез, 2019. Т. 42 (1). С. 15. https://doi.org/10.21517/0202-3822-2019-42-1-15-38
2. <em>Melnikov A.V. et al.</em> // Fusion Eng. Des. 2015. V. 96–97. P. 306. https://doi.org/10.1016/j.fusengdes.2015.06.080
3. <em>Драбинский М.А. и др.</em> // Сборник тезисов докладов XLIX Международной звенигородской конференции по физике плазмы и УТС. С. 68.
4. <em>Melnikov A.V. et al.</em> // Nucl. Fusion. 2017. V. 57 (7). P. 072004.
5. <em>Melnikov A.V. et al</em>. // Fusion Eng. Des. 2019. V. 146. P. 850. https://doi.org/10.1016/j.fusengdes.2019.01.096
6. <em>Мельников А.В. и др.</em> // Письма в ЖЭТФ. 2022. Т. 115 (6). С. 360. https://doi.org/10.31857/S1234567822060040
7. <em>Krupin V. et al.</em> // J. Instrum. 2020. V.15 (2). P. C02027.
8. <em>Roy I.N. et al.</em> // EPJ Web Conf. 2017. V. 149. P. 03021. https://doi.org/10.1051/epjconf/201714903021
9. <em>Cычyгoв Д.Ю. и дp.</em> // Comput. Nanotechnol. 2017. No. 2. P. 24.
10. <em>Горбун М.С. и др.</em> // ВАНТ. Сер.: Термоядерный синтез. 2019. Т. 42 (4). С. 45.
11. Leica Geosystems AG – Part of Hexagon. https://leicageosystems.com/products/total-stations/robotic-total-stations/leica-nova-tm50.
12. Федеральный информационный фонд по обеспечению единства измерений, номер записи 369192. https://fgis.gost.ru/fundmetrology/registry/4/items/369192.
13. Zoller + Fröhlich GmbH. https://www.zofre.de/laserscanner/3d-laserscanner/z-f-imagerr-5016.
14. Федеральный информационный фонд по обеспечению единства измерений, номер записи 530258. https://fgis.gost.ru/fundmetrology/registry/4/items/ 530258.
15. СП 126.13330.2017. Геодезические работы в строительстве.
16. ГКИНП-02-033-82. Инструкция по топографической съемке в масштабах 1:5000, 1 : 2000, 1 : 1000 и 1 : 500.
17. Компания “Кредо-Диалог”. https://credo-dialogue.ru/produkty/korobochnye-produkty/239-credo-datprofessional-naznachenie.html.
18. Реестр российского программного обеспечения. https://reestr.digital.gov.ru/reestr/306513/?sphrase_ id=827123.
19. Zoller + Fröhlich GmbH. https://www.zofre.de/en/laserscanners/laserscanning-software/z-f-lasercontrolr.
20. ReCap Pro [2024] Features – Autodesk // AUTODESK US. https://www.autodesk.com/products/recap/features.
21. PolyWorks – The Smart 3D Metrology Digital Ecosystem // Innovmetric. https://www.innovmetric.com/products/products-overview.
22. ГОСТ Р 8.563–2009. Государственная система обес печения единства измерений. Методики (методы) измерений.
23. ГОСТ Р 8.736–2011. Государственная система обеспечения единства измерений. Измерения прямые многократные. Методы обработки резуль
24. татов измерений. Основные положения.
Review
For citations:
Shelegeda I.A., Drabinskiy M.A., Talalay M.V., Nazarov I.A. Verification of the 3D CAD-Model of T-15MD Tokamak. Nuclear Physics and Engineering. 2024;15(2):149-158. (In Russ.) https://doi.org/10.56304/S2079562923030314
Views:
50
Email this article 