Two-Stage Technique of Controlling the Heat Release Distribution
https://doi.org/10.56304/S2079562922010249
Abstract
A two-stage method is proposed for controlling the regulators in the fuel burnup process during a single operating period. At the first stage, the coefficient of the heat release irregularity at the initial time moment is minimized; at the second stage, the instability criterion for a specified time interval is minimized. The linear interpolation of the neutron flux constructed on the basis of perturbation theory is considered to improve the calculation accuracy without high computational costs.
About the Author
А. М. Kuzmin
National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow, 115409 Russia
Russian Federation
Russian Federation
References
1. <em>Рачков В.И., Поплавский В.М., Цибуля А.М. и др.</em> // Атомная энергия. 2010. Т. 108. № 4. С. 201–206.
2. <em>Chermak J., Matveev V.I.</em> // Jad. Energ. 1985.V. 31. P. 143–148.
3. <em>Белл Д., Глесстон С.</em> Теория ядерных реакторов. 1974. Москва: Атомиздат.
4. <em>Матвеев В.И., Хомяков Ю.С.</em> Техническая физика быстрых реакторов с натриевым теплоносителем. 2012. Москва: Издательский дом МЭИ.
5. <em>Моисеев Н.Н.</em> Математические задачи системного анализа. 1981. Москва: Наука.
6. <em>Марчук Г.И.</em> Сопряженные уравнения и анализ сложных систем. 1992. Москва: Физматлит.
7. <em>Сухарев А.Г.,Тимохов А.В., Федоров В.В.</em> Курс методов оптимизации. 2005. Москва: Физматлит.
8. <em>Кузьмин А.М.</em> // Атомная энергия. 2017. Т. 122. № 1. С. 3–9.
Review
For citations:
Kuzmin А.М. Two-Stage Technique of Controlling the Heat Release Distribution. Nuclear Physics and Engineering. 2022;13(2):109-112. (In Russ.) https://doi.org/10.56304/S2079562922010249
Views:
132
Email this article 