Effect of Pulsed Plasma Flow Treatment Parameters on the Thickness, Microhardness, and Elemental and Phase Compositions of Modified Surface Layers of Structural Steel
https://doi.org/10.56304/S207956292205027X
Abstract
The processing of materials by pulsed plasma flows is insufficiently studied, that does not allow estimating the main parameters of the modified layer. In view of this, the processing mode is selected experimentally for each individual material to obtain the optimal hardening layer thickness and microhardness. In this scientific work, structural steels 45, 20Kh and 40KhN2MA were irradiated at different durations and number of pulses, subsequently, the elemental and phase composition, microhardness and thickness of the hardening layer were studied.
About the Authors
A. K. Kutukov
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
I. M. Poznyak
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
S. E. Panin
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
N. A. Danilina
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
M. A. Miller
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
V. V. Gaponova
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
A. A. Sergeechev
JSC “SSC RF Trinity”
Russian Federation
Russian Federation
Troitsk, 108840
References
1. Грибков В.А. и др. Перспективные радиационно-пучковые технологии обработки материалов: Учеб. пособие для студентов. 2001. Москва: Круглый год.
2. Соснин Н.А., Ермаков С.А., Тополянский П.А. Плазменные технологии. Сварка, нанесение покрытий, упрочнение. 2008. Москва: Машиностроение.
3. Сорокин В.Г. и др. Марочник сталей и сплавов. 1989. Москва: Машиностроение.
4. Коваленко Д.В. и др. // ВАНТ. Сер.: Термоядерный синтез. 2014. Т. 37 (4). С. 39–48.
5. Позняк И.М. и др. // ВАНТ. Сер.: Термоядерный синтез. 2012. № 4. С. 23–33.
6. Морозов А.И. Введение в плазмодинамику. 2006. Москва: Физматлит.
7. Климов Н.С. Макроскопическая эрозия материалов при их облучении интенсивными потоками плазмы. дис. к.ф.-м.н. 01.04.08. 2011. Троицк.
Review
For citations:
Kutukov A.K., Poznyak I.M., Panin S.E., Danilina N.A., Miller M.A., Gaponova V.V., Sergeechev A.A. Effect of Pulsed Plasma Flow Treatment Parameters on the Thickness, Microhardness, and Elemental and Phase Compositions of Modified Surface Layers of Structural Steel. Nuclear Physics and Engineering. 2023;14(4):398-404. (In Russ.) https://doi.org/10.56304/S207956292205027X
Views:
47
Email this article 